Editing OpenWRT/Setting up Wire Guard (section)

===Step 4: Setting up the WireGuard interface===

1.  Go into LuCI and head to `Network>Interfaces>Add New Interface`
    
2.  Set the name of the new interface as `wg0`
    
3.  Set the protocol to `WireGuard VPN`
    
4.  Click Submit
    
5.  Paste the private key you got from Step 3 into the `Private Key` field
    
6.  Set the listen port to `1234`
    
7.  In the `IP Addresses` field, type `10.14.0.1/24`
    
8.  Go to the `Firewall Settings` tab and assign the interface to your LAN zone if it's not automatically been assigned. This will enable you to access your LAN devices when you're connected to your VPN. If you want to keep your devices seperate, you can create another Firewall zone specifically for the WireGuard Interface.
    
9.  Click Save & Apply