Editing OpenWRT/Setting up Wire Guard (section)

===Step 5: Setting up the VPN connection on an Android device===

1.  Download the WireGuard app from the Play Store or F-Droid or whatever is your preferred source of apps
    
2.  Open the WireGuard app
    
3.  Tap the plus icon and go to "Create from scratch"
    
4.  Make up a name for your VPN connection
    
5.  Tap "Generate" to generate yourself a public and private key
    
6.  In the `Addresses` field, type `10.14.0.3/32`
    
7.  Leave the `Listen Port` and `MTU` fields empty unless you need to change them for whatever reason
    
8.  In the DNS servers field, either type the address of your home DNS server or use a DNS server of your choice (e.g. `1.1.1.1`)
    
9.  Tap `Add Peer`
    
10.  Paste the Public Key from the `/root/` directory of your OpenWRT device
    
11.  Leave the `Pre-shared key` field blank
    
12.  In the `Allowed IPs` field, type `0.0.0.0/0,::0` (You should add ::0 even if you aren't using IPv6, as this stops your device from leaking data when connected to IPv6 enabled sites.)
    
13.  In the `Endpoint` field, type the public (WAN) IP address or domain name of your OpenWRT device, followed by a colon and the port number. For example: `69.65.164.12:1234`
    
14.  In the `Persistent Keepalive` field, type `25`
    
15.  Save the connection