Editing OpenWRT WireGuard VPN Server Tutorial (section)

==Step 5: Setting up the VPN connection on an Android device==

# Download the WireGuard app from the Play Store or F-Droid or whatever is your preferred source of apps
# Open the WireGuard app
# Tap the plus icon and go to "Create from scratch"
# Make up a name for your VPN connection
# Tap "Generate" to generate yourself a public and private key
# In the Addresses field, type 10.14.0.3/32
# Leave the Listen Port and MTU fields empty unless you need to change them for whatever reason
# In the DNS servers field, either type the address of your home DNS server or use a DNS server of your choice (e.g. 1.1.1.1)
# Tap Add Peer
# Paste the Public Key from the /root/ directory of your OpenWRT device
# Leave the Pre-shared key field blank
# In the Allowed IPs field, type 0.0.0.0/0,::0 (You should add ::0 even if you aren't using IPv6, as this stops your device from leaking data when connected to IPv6 enabled sites.)
# In the Endpoint field, type the public (WAN) IP address or domain name of your OpenWRT device, followed by a colon and the port number. For example: 69.65.164.12:1234
# In the Persistent Keepalive field, type 25
# Save the connection